Custom Wheel Cap for AR Torq Thrust Wheels 2-1/8" - Machined

These caps are sold in pairs, ordering "1" will get you two wheel caps.  So if you'd like a set of four caps for your vehicle, make sure the quantity says 2 in your cart.

This cap is designed to fit the American Racing Torq Thrust wheels that have the 2-1/8" fastener spacing, and provide clearance for the dust cap on the end of the front axles.  This "smaller" spacing tends to be found on the older American Racing Torq Thrust Wheels.

I feel the stock wheel caps provided by American Racing are too large and stick out too far, so I designed these caps to be a low profile option, while still looking like they came from the factory.

These caps are CNC machined from 1/2" thick 6061 Aluminum plate, here in the United States.  The back side of the wheel cap is bored out over 3/8" to clear most dust caps and Spindle ends.  Due to the nature of machined parts, some tooling marks can be seen.

While these are designed to clear the dust caps on the front of some classic vehicles, they also work well on the rear wheels, completing the look around the whole vehicle.

Each cap is shipped with five flat head cap screws for a flush, minimalist finish.

These caps fit a number of American Racing Wheels, including model numbers V40, V45, and some other models.

The simplest way to determine if these caps will fit your ARTT wheels, is to measure the distance from the center of one wheel cap threaded hole on the wheel to the far edge of the next wheel cap threaded hole.  These caps will fit those with a 2-1/8" distance (see pic).  The bolt pattern diameter for these caps is 3.55", but it's not as easy to measure that diameter, that's why it's easier to measure the distance of the bolt holes themselves.

If your measurement is closer to 2-1/4" instead of 2-1/8", you'll want to check out my other Wheel Caps with the larger fastener pattern.  You must make sure you are ordering the correct wheel cap size.

The pictures of the caps on a classic Mustang are of my car with the ARTT wheels and the other cap style in place.  These 2-1/8" Caps bolt onto the wheel the same way.  I took the extra step to polish these caps, but polishing is not an option at this time.  The pictures of the caps off the car are how they look when you receive them.

MAKE SURE YOU NEED THE 2-1/8" FASTENER SPACING STYLE BEFORE ORDERING.  YOU SHOULD DOUBLE CHECK BEFORE ORDERING.