{"products":[{"id":10318625538369,"title":"Fuel Line for F100 with Rear Gas Tank","handle":"fuel-line-for-f100-with-rear-gas-tank","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA custom fixed length Fuel Line with a Fittings to connect a converted Rear Gas Tank up to the Stock Style Fuel Pump on F100s!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Fuel Line Kit will fit the 1967-1972 F100 (possibly other years and models too) and it is designed to connect from the output of the fuel sending unit in the gas tank and run all the way up to the stock style fuel pump on your FE or Small Block engine.  This will fit both the Short Bed and Long Bed Trucks.  No need to worry about cutting the fuel hose and struggle with installing the AN fittings.  \u003cem\u003eNote: this is mainly designed for the super common upgrade of removing the tank from behind the seat in the Cab back to behind the rear axle.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Fuel Line is PTFE covered i\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003en a black braid, and comes in the length of 168 inches (14 feet).  The kit also includes the fitting to connect to the hard-line output of the fuel sending unit in the gas tank.  It is very common to install the 1970 Mustang gas tank in between the frame rails of these F100 trucks, and this kit is designed to work with the 3\/8\" hard-line on that fuel sending unit (5\/16\" hard-line fitting included too, just in case).  This kit also includes the various fittings to connect the opposite end of the fuel line to the fuel pump on the engine.  Some OEM style fuel pumps have a 1\/8\" NPT threaded input, that fitting is included.  Some fuel pumps have a 5\/16\" or 3\/8\" barbed hard-line for the input, the fittings needed to fit those are included as well.  Please note if you elect to connect to the fuel pump via the barbed fitting, you will need the corresponding piece of fuel line between your fuel pump and this kit (see pics).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWhen modifying the barbed output on the fuel sending unit trim the minimum amount possible off the end of the hard-line near the barbed end (see pic), this will help ensure you have enough hard-line to work with the -6AN fitting in this kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWith lots of aftermarket fuel sending units and fuel pumps available, it is difficult to ensure compatibility with the included hardware and every combination out there.  It is up to the buyer to determine compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis full line kit is featured in the Gas Tank Conversion video linked below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One 168 inch black braided 3\/8\" PTFE fuel line with female -6AN fittings on each end, one 3\/8\" hard-line to -6AN fitting, one 5\/16\" to -6AN fitting, one -6AN to 3\/8\" barbed fitting, one -6AN to 5\/16\" barbed fitting, and one -6AN to 1\/8\" NPT fitting.\u003c\/p\u003e","published_at":"2026-07-19T19:10:58-07:00","created_at":"2026-07-15T21:32:09-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fuel Line Kit","tags":[],"variants":[{"id":51985757045057,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6ANRTNKF100_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"144.95","grams":822,"compare_at_price":null,"position":1,"product_id":10318625538369,"created_at":"2026-07-15T21:32:09-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":65455015493953,"created_at":"2026-07-16T07:14:40-07:00","position":1,"updated_at":"2026-07-16T07:14:43-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/1_1560df26-6d16-4c0a-a8f2-e0a302ccc162.jpg?v=1784211283","width":5712,"height":4284},{"id":65455015526721,"created_at":"2026-07-16T07:14:40-07:00","position":2,"updated_at":"2026-07-16T07:14:42-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/2_d91c1974-901e-406d-b034-8e28272c92f3.jpg?v=1784211282","width":4032,"height":3024},{"id":65455015559489,"created_at":"2026-07-16T07:14:40-07:00","position":3,"updated_at":"2026-07-16T07:14:42-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/3_fb72f716-3bd8-49dd-910d-2b77e0e2941b.jpg?v=1784211282","width":5712,"height":4284},{"id":65455015592257,"created_at":"2026-07-16T07:14:40-07:00","position":4,"updated_at":"2026-07-16T07:14:42-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/4_025243ff-c815-41f1-8aed-b15a2758f0c4.jpg?v=1784211282","width":5712,"height":4284},{"id":65455015625025,"created_at":"2026-07-16T07:14:40-07:00","position":5,"updated_at":"2026-07-16T07:14:42-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/5_17720159-a27e-45b5-a259-aa276136ab58.jpg?v=1784211282","width":4032,"height":3024},{"id":65455015657793,"created_at":"2026-07-16T07:14:40-07:00","position":6,"updated_at":"2026-07-16T07:14:42-07:00","product_id":10318625538369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6_0a60e8f8-9be7-45d9-bdcc-e73b011fe089.jpg?v=1784211282","width":1075,"height":605}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10282169336129,"title":"Fuel Line with Filter and Gauge Kit","handle":"fuel-line-and-filter-kit","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA custom fixed length Fuel Line with a Filter and Fuel Pressure Gauge Kit!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Fuel Line Kit will fit the 1964-1973 Mustang (possibly other years and models too) and it is designed for you to bolt in and fit between your factory fuel pump and your carburetor.  No need to worry about cutting the fuel hose and struggle with installing the AN fittings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Fuel Line is PTFE covered i\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003en a black braid, and comes in the length of 24 inches.  The kit also includes the fitting to thread into the stock fuel pump with a -6AN thread on the opposite end, converting the fuel line to common -6AN fitting system.  There is also a 90 degree -6AN fitting to connect the fuel line to the fuel filter as it fits around the side of the distributor and lines up with the carburetor fuel inlet.  The outlet end of the fuel filter pairs with a -6AN female to female coupler where the last -6AN fitting is installed that holds the fuel pressure gauge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe contents of the kit can be seen in more detail in the link of the YouTube video , and it explains how you install it on your vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWith lots of aftermarket fuel pumps and carburetor fuel inlet lines available, it is difficult to ensure compatibility with the included hardware and every combination out there.  It is up to the buyer to determine compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One 24 inch black braided 3\/8\" PTFE fuel line, one fuel pump adapter to -6AN fitting, one 90 degree -6AN fitting, one 40-micron fuel filter, and one straight -6AN female to female coupler, one fuel pressure gauge, and one male to female -6AN adapter where the gauge is installed.\u003c\/p\u003e","published_at":"2026-06-11T15:59:56-07:00","created_at":"2026-06-10T21:09:35-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fuel Line and Filter Kit","tags":[],"variants":[{"id":51831379198273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6ANCFLKFG_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"99.95","grams":397,"compare_at_price":null,"position":1,"product_id":10282169336129,"created_at":"2026-06-10T21:09:35-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":65085481189697,"created_at":"2026-06-11T10:49:01-07:00","position":1,"updated_at":"2026-06-11T10:49:03-07:00","product_id":10282169336129,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6670.jpg?v=1781200143","width":4032,"height":3024},{"id":65085481222465,"created_at":"2026-06-11T10:49:01-07:00","position":2,"updated_at":"2026-06-11T10:49:05-07:00","product_id":10282169336129,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6671.jpg?v=1781200145","width":4032,"height":3024},{"id":65085481255233,"created_at":"2026-06-11T10:49:01-07:00","position":3,"updated_at":"2026-06-11T10:49:03-07:00","product_id":10282169336129,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6672.jpg?v=1781200143","width":4032,"height":3024},{"id":65085486858561,"created_at":"2026-06-11T10:50:41-07:00","position":4,"updated_at":"2026-06-11T10:50:44-07:00","product_id":10282169336129,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6668_cropped.jpg?v=1781200244","width":5256,"height":2957}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10269587702081,"title":"Fuel Filter","handle":"fuel-filter","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA stealth looking, Fuel Filter!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Fuel Filter kit is designed to work with fuel lines that have a -6AN fitting as it sits between the fuel line from the fuel pump to the fuel inlet line on the Carburetor, or in front of a Fuel Pressure Gauge if you have one.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Fuel Filter has a male -6AN fitting on each end, and it has a 40 micron filter inside.  The 40 micron filter is the most common and most practical filter for automotive applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe kit also includes a -6AN female to female coupler to make this an easy install when adding to a fuel line with -6AN fittings already in place. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis fuel filter is the perfect match for the fuel line kits \u003ca href=\"https:\/\/krusebuilt.com\/products\/fuel-line-kit-silver\"\u003eBraided Stainless Steel\u003c\/a\u003e and \u003ca href=\"https:\/\/krusebuilt.com\/products\/custom-fuel-line-kit-black\"\u003eBlack Nylon Braided\u003c\/a\u003e that I also sell, and they fit most Ford fuel pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWith lots of aftermarket fuel pumps and carburetor fuel inlet lines available, it is difficult to ensure compatibility with the included hardware and every combination out there.  It is up to the buyer to determine compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One 40 micron fuel filter with -6AN male fittings on each end, and one coupler with female and female -6AN fitting ends.\u003c\/p\u003e","published_at":"2026-05-30T17:20:30-07:00","created_at":"2026-05-30T16:59:17-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fuel Pressure Gauge","tags":[],"variants":[{"id":51778114683201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6ANMMFF_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"29.95","grams":198,"compare_at_price":null,"position":1,"product_id":10269587702081,"created_at":"2026-05-30T16:59:18-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":64944385458497,"created_at":"2026-05-30T17:00:42-07:00","position":1,"updated_at":"2026-05-30T17:00:44-07:00","product_id":10269587702081,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6542.jpg?v=1780185644","width":4032,"height":3024},{"id":64944385491265,"created_at":"2026-05-30T17:00:42-07:00","position":2,"updated_at":"2026-05-30T17:00:44-07:00","product_id":10269587702081,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6543.jpg?v=1780185644","width":4032,"height":3024},{"id":64944385524033,"created_at":"2026-05-30T17:00:42-07:00","position":3,"updated_at":"2026-05-30T17:00:44-07:00","product_id":10269587702081,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6544.jpg?v=1780185644","width":4032,"height":3024},{"id":64944385556801,"created_at":"2026-05-30T17:00:42-07:00","position":4,"updated_at":"2026-05-30T17:00:47-07:00","product_id":10269587702081,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6545.jpg?v=1780185647","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10194124407105,"title":"S550 to F100 Braided Brake Line Kit","handle":"s550-to-f100-braided-brake-line-kit","body_html":"\u003cp\u003e\u003cstrong\u003eThis Braided Brake Line kit is designed for the S550 Rear End Assembly that is installed on F100 trucks.  It connects the factory brake installed along the F100 frame rail to the brake lines attached to the S550 rear calipers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis 3\/16\" braided brake line kit includes three lengths of braided line, one fitting to connect the factory F100 brake line to this kit, one Tee that connects all three braided lines, and two fittings to connect the braided lines to the brake lines attached to the S550 rear calipers (see pics).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis Kit is meant to reduce the need to find various brake line parts to convert from the Standard 3\/8-24 brake line fitting to the M10x1.5 for the S550 rear calipers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eMake sure the hard brake line running along the driver's side inner frame rail is in good order, then this Kit will allow you to finish the brake line from there to the brake lines attached to the S550 rear calipers.  It does not matter if you have a long bed or short bed F100.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One braided brake line kit to connect the F100 brake line to the S550 brake lines on the rear calipers.\u003c\/p\u003e","published_at":"2026-04-02T07:03:50-07:00","created_at":"2026-03-13T09:58:03-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Standard to Metric Brake Line Kit","tags":[],"variants":[{"id":51483063451969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FBLK_72","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"99.95","grams":269,"compare_at_price":null,"position":1,"product_id":10194124407105,"created_at":"2026-03-13T09:58:03-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":64017432740161,"created_at":"2026-03-13T10:27:46-07:00","position":1,"updated_at":"2026-03-13T10:27:48-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6025_89a3db76-cd39-4a8c-96f7-33db10364260.jpg?v=1773422868","width":4032,"height":3024},{"id":64017432772929,"created_at":"2026-03-13T10:27:46-07:00","position":2,"updated_at":"2026-03-13T10:27:48-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6026_2aff63c8-5e5e-4114-a47c-ab06c59ccb66.jpg?v=1773422868","width":4032,"height":3024},{"id":64017432805697,"created_at":"2026-03-13T10:27:46-07:00","position":3,"updated_at":"2026-03-13T10:27:49-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6027_mod_db22a6f8-b600-40af-96e4-4fd8c3ac26cd.jpg?v=1773422869","width":4032,"height":3024},{"id":64318760681793,"created_at":"2026-04-02T07:02:58-07:00","position":4,"updated_at":"2026-04-02T07:02:59-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/1_76cb8dcb-bda8-4d37-8a97-bb1d6a6c87f1.jpg?v=1775138579","width":1634,"height":1015},{"id":64318760714561,"created_at":"2026-04-02T07:02:58-07:00","position":5,"updated_at":"2026-04-02T07:02:59-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/2_9f55bb3c-0766-4dfe-afd6-52b00182f474.jpg?v=1775138579","width":1676,"height":1042},{"id":64318760747329,"created_at":"2026-04-02T07:02:58-07:00","position":6,"updated_at":"2026-04-02T07:03:00-07:00","product_id":10194124407105,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/3_7c8bb25d-2c04-45e7-a7d2-fac56b9f9587.jpg?v=1775138580","width":1429,"height":786}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10194131484993,"title":"Shifter Boot Trim Plate","handle":"shifter-boot-trim-plate","body_html":"\u003cp\u003eThis Shifter Boot Trim Plate is designed to add that custom look to the interior of your car, while being incredibly easy to install and easy to remove if you ever need access to that area.\u003c\/p\u003e\n\u003cp\u003eThis Trim Plate is CNC machined from 6061 Aluminum, and there's even an option to get a black powder coated trim piece if you're going for that stealth look.\u003c\/p\u003e\n\u003cp\u003eThis Trim Plate is designed to fit the fairly common 5.5\" x 6.5\" rubber shifter boot, but if you don't have that shifter boot, there's an option to order one with this kit.\u003c\/p\u003e\n\u003cp\u003eTrim Plate includes stainless steel hardware for the raw machined Trim, or black hardware for the powder coated Trim.\u003c\/p\u003e\n\u003cp\u003eWe also offer a shifter boot base plate to make installation even easier, removing the need to pre-drill hole in the transmission tunnel and fight the carpet getting caught in the drill bit, it can be found \u003ca href=\"https:\/\/krusebuilt.com\/products\/shifter-boot-mount-plate\"\u003eHERE\u003c\/a\u003e.  This is a great addition to this Trim Plate, be sure to add it to your order!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eThere are four options, be sure to pick the one that works best for your build!!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e","published_at":"2026-03-17T17:27:09-07:00","created_at":"2026-03-13T10:32:20-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Interior Trim","tags":[],"variants":[{"id":51483083505985,"title":"Raw Machined Trim Plate","option1":"Raw Machined Trim Plate","option2":null,"option3":null,"sku":"ECT004.3","requires_shipping":true,"taxable":true,"featured_image":{"id":64017533927745,"product_id":10194131484993,"position":1,"created_at":"2026-03-13T10:37:33-07:00","updated_at":"2026-03-13T10:37:35-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6021.jpg?v=1773423455","variant_ids":[51483083505985]},"available":true,"price":"49.95","grams":181,"compare_at_price":null,"position":1,"product_id":10194131484993,"created_at":"2026-03-13T10:32:21-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":51483083538753,"title":"Raw Machined Trim Plate with Boot","option1":"Raw Machined Trim Plate with Boot","option2":null,"option3":null,"sku":"ETC002.3","requires_shipping":true,"taxable":true,"featured_image":{"id":64017534026049,"product_id":10194131484993,"position":7,"created_at":"2026-03-13T10:37:33-07:00","updated_at":"2026-03-19T13:27:38-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6024.jpg?v=1773952058","variant_ids":[51483083538753]},"available":true,"price":"69.95","grams":181,"compare_at_price":null,"position":2,"product_id":10194131484993,"created_at":"2026-03-13T10:32:21-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":51483083571521,"title":"Black Coated Trim Plate","option1":"Black Coated Trim Plate","option2":null,"option3":null,"sku":"ETC001.3","requires_shipping":true,"taxable":true,"featured_image":{"id":64074348953921,"product_id":10194131484993,"position":4,"created_at":"2026-03-17T17:25:39-07:00","updated_at":"2026-03-19T13:27:38-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6048.jpg?v=1773952058","variant_ids":[51483083571521]},"available":true,"price":"54.95","grams":181,"compare_at_price":null,"position":3,"product_id":10194131484993,"created_at":"2026-03-13T10:32:21-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":51483096449345,"title":"Black Coated Trim Plate with Boot","option1":"Black Coated Trim Plate with Boot","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":{"id":64074349904193,"product_id":10194131484993,"position":8,"created_at":"2026-03-17T17:25:47-07:00","updated_at":"2026-03-17T17:25:50-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6050.jpg?v=1773793550","variant_ids":[51483096449345]},"available":true,"price":"74.95","grams":181,"compare_at_price":null,"position":4,"product_id":10194131484993,"created_at":"2026-03-13T10:51:17-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":64017533927745,"created_at":"2026-03-13T10:37:33-07:00","position":1,"updated_at":"2026-03-13T10:37:35-07:00","product_id":10194131484993,"variant_ids":[51483083505985],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6021.jpg?v=1773423455","width":4032,"height":3024},{"id":64017533960513,"created_at":"2026-03-13T10:37:33-07:00","position":2,"updated_at":"2026-03-13T10:37:35-07:00","product_id":10194131484993,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6022.jpg?v=1773423455","width":4032,"height":3024},{"id":64017533993281,"created_at":"2026-03-13T10:37:33-07:00","position":3,"updated_at":"2026-03-19T13:27:38-07:00","product_id":10194131484993,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6023.jpg?v=1773952058","width":4032,"height":3024},{"id":64074348953921,"created_at":"2026-03-17T17:25:39-07:00","position":4,"updated_at":"2026-03-19T13:27:38-07:00","product_id":10194131484993,"variant_ids":[51483083571521],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6048.jpg?v=1773952058","width":4032,"height":3024},{"id":64074348986689,"created_at":"2026-03-17T17:25:39-07:00","position":5,"updated_at":"2026-03-19T13:27:38-07:00","product_id":10194131484993,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6049.jpg?v=1773952058","width":4032,"height":3024},{"id":64074349478209,"created_at":"2026-03-17T17:25:43-07:00","position":6,"updated_at":"2026-03-19T13:27:38-07:00","product_id":10194131484993,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6051.jpg?v=1773952058","width":4032,"height":3024},{"id":64017534026049,"created_at":"2026-03-13T10:37:33-07:00","position":7,"updated_at":"2026-03-19T13:27:38-07:00","product_id":10194131484993,"variant_ids":[51483083538753],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6024.jpg?v=1773952058","width":4032,"height":3024},{"id":64074349904193,"created_at":"2026-03-17T17:25:47-07:00","position":8,"updated_at":"2026-03-17T17:25:50-07:00","product_id":10194131484993,"variant_ids":[51483096449345],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6050.jpg?v=1773793550","width":4032,"height":3024}],"options":[{"name":"Shifter Boot Trim Plate","position":1,"values":["Raw Machined Trim Plate","Raw Machined Trim Plate with Boot","Black Coated Trim Plate","Black Coated Trim Plate with Boot"]}]},{"id":10194162155841,"title":"Chassis Stabilization System - 1967-1968 Mustang","handle":"chassis-stabilization-system-1967-1968-mustang","body_html":"\u003cp\u003e\u003cstrong\u003eA must-have upgrade kit to dial in the chassis rigidity for your Classic Mustang!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit combines three critical chassis upgrades for the 1967 and 1068 Classic Mustang for massive improvements over the stock car.\u003c\/p\u003e\n\u003cp\u003eThis kit includes three products designed and used by KruseBuilt:  The Export Brace, the Monte Carlo Bar, and the Brake Master Cylinder Support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Export Brace: \u003c\/strong\u003e Its job is to increase the rigidity of the uni-body, between the firewall and shock towers, so the suspension can work more precisely.  The Brace will reduce shock tower flex, improves steering precision by maintaining more consistent camber and caster, and it also helps to prevent long-term chassis fatigue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Monte Carlo Bar:\u003c\/strong\u003e  A structural brace that connects the left and right shock towers across the engine bay to reduce the tendency of the shock towers to move toward or away from each other when the car is under load.  This Bar also helps maintain the suspension geometry to aid the camber and caster angles, and improve steering response and predictability.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Brake Master Cylinder Brace:\u003c\/strong\u003e  This Brace is installed between the firewall and the Master Cylinder and then installed on the Shock Tower.  This reinforces the firewall and eliminates the wall from flexing under hard braking scenarios, and allows the forces applied to the brake pedal to be transferred towards the braking instead of forcing the firewall to flex.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  This kit is designed for the 1967-1968 Mustang and includes one Export Brace, one Monte Carlo Bar, and one Brake Master Cylinder Brace.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-03-14T15:19:35-07:00","created_at":"2026-03-13T12:24:11-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Chassis Kit","tags":[],"variants":[{"id":51483213234497,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6768CSS_1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"529.95","grams":8618,"compare_at_price":null,"position":1,"product_id":10194162155841,"created_at":"2026-03-13T12:24:11-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":64018561925441,"created_at":"2026-03-13T12:35:29-07:00","position":1,"updated_at":"2026-03-13T12:35:38-07:00","product_id":10194162155841,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6768_CSS_Main_3f41e3cb-6e8c-47ab-9bf0-eedead459b36.jpg?v=1773430538","width":5712,"height":4284},{"id":64018407260481,"created_at":"2026-03-13T12:07:56-07:00","position":2,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194162155841,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6470EB.jpg?v=1773430787","width":4032,"height":3024},{"id":64018407293249,"created_at":"2026-03-13T12:07:59-07:00","position":3,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194162155841,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6470EB_1.jpg?v=1773430787","width":4032,"height":3024},{"id":64018519720257,"created_at":"2026-03-13T12:27:46-07:00","position":4,"updated_at":"2026-03-13T12:35:38-07:00","product_id":10194162155841,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/67-70BMCB.jpg?v=1773430538","width":4032,"height":3024},{"id":64018521129281,"created_at":"2026-03-13T12:28:04-07:00","position":5,"updated_at":"2026-03-13T12:35:38-07:00","product_id":10194162155841,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6768MC.jpg?v=1773430538","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10194136138049,"title":"Chassis Stabilization System - 1964-1966 Mustang","handle":"chassis-stabilization-system-1964-1966-mustang","body_html":"\u003cp\u003e\u003cstrong\u003eA must-have upgrade kit to dial in the chassis rigidity for your Classic Mustang!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit combines four critical chassis upgrades for the Classic Mustang for massive improvements over the stock car.\u003c\/p\u003e\n\u003cp\u003eThis kit includes four products designed and used by KruseBuilt:  The Export Brace, the Monte Carlo Bar, the Brake Master Cylinder Support, and the Front Crossmember.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Export Brace: \u003c\/strong\u003e Its job is to increase the rigidity of the uni-body, between the firewall and shock towers, so the suspension can work more precisely.  The Brace will reduce shock tower flex, improves steering precision by maintaining more consistent camber and caster, and it also helps to prevent long-term chassis fatigue.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Monte Carlo Bar:\u003c\/strong\u003e  A structural brace that connects the left and right shock towers across the engine bay to reduce the tendency of the shock towers to move toward or away from each other when the car is under load.  This Bar also helps maintain the suspension geometry to aid the camber and caster angles, and improve steering response and predictability.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Brake Master Cylinder Brace:\u003c\/strong\u003e  This Brace is installed between the firewall and the Master Cylinder and then installed on the Shock Tower.  This reinforces the firewall and eliminates the wall from flexing under hard braking scenarios, and allows the forces applied to the brake pedal to be transferred towards the braking instead of forcing the firewall to flex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Front Crossmember:\u003c\/strong\u003e  This bar continues to tie together the two frame rails of the Mustang while also linking in the lower control arm mount points into a single system.  By rigidly locating the lower suspension mounting points, the Crossmember helps maintain the correct\u003cstrong\u003e \u003c\/strong\u003erelationship between the control arms, steering components, and frame rails. This keeps alignment settings more consistent when the car is under load.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  This kit is designed for the 1964-1966 Mustang and includes one Export Brace, one Monte Carlo Bar, one Brake Master Cylinder Brace, and one front Crossmember.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-03-14T15:19:26-07:00","created_at":"2026-03-13T10:53:29-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Chassis Kit","tags":[],"variants":[{"id":51483097399617,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6466CSS_1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"729.95","grams":8618,"compare_at_price":null,"position":1,"product_id":10194136138049,"created_at":"2026-03-13T10:53:29-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":64018584961345,"created_at":"2026-03-13T12:39:37-07:00","position":1,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6466_CSS_Main_8cf33a1a-39a0-45dd-ae06-a09df03f3ddb.jpg?v=1773430787","width":5712,"height":4284},{"id":64018407260481,"created_at":"2026-03-13T12:07:56-07:00","position":2,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6470EB.jpg?v=1773430787","width":4032,"height":3024},{"id":64018407293249,"created_at":"2026-03-13T12:07:59-07:00","position":3,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6470EB_1.jpg?v=1773430787","width":4032,"height":3024},{"id":64018474664257,"created_at":"2026-03-13T12:19:18-07:00","position":4,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6466BMCB_1.jpg?v=1773430787","width":4032,"height":3024},{"id":64018474631489,"created_at":"2026-03-13T12:19:18-07:00","position":5,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6466BMCB.jpg?v=1773430787","width":4032,"height":3024},{"id":64018471911745,"created_at":"2026-03-13T12:19:02-07:00","position":6,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6466MC.jpg?v=1773430787","width":4032,"height":3024},{"id":64018478793025,"created_at":"2026-03-13T12:20:32-07:00","position":7,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/6466MC_1.jpg?v=1773430787","width":4032,"height":3024},{"id":63898703921473,"created_at":"2026-03-05T15:07:46-08:00","position":8,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5985.jpg?v=1773430787","width":4032,"height":3024},{"id":63898704445761,"created_at":"2026-03-05T15:08:13-08:00","position":9,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5977.jpg?v=1773430787","width":5712,"height":4284},{"id":63898704773441,"created_at":"2026-03-05T15:08:30-08:00","position":10,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10194136138049,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5979.jpg?v=1773430787","width":5712,"height":4284}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10191104770369,"title":"Monte Carlo Bar - Gen 2 (1967-1968)","handle":"monte-carlo-bar-gen-2-1967-1968","body_html":"\u003cp\u003e\u003cstrong\u003eFinally, a Monte Carlo bar that will fit your car without modifying the car!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bar will fit the 1967-1968 Mustang (possibly other years and models too) and it is designed to be adjustable so it will fit without the need of using hydraulics to widen the fenders or a welder to cut off the mounts, shorten the bar, and then weld the mounts back on.\u003c\/p\u003e\n\u003cp\u003eThe bar and mount brackets are powder coated in Satin Black for a long-lasting, durable finish and it matches just about anything in anyone's engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One aluminum Bar, Right and Left hand Rod Ends and jam nuts, one right and left Mounting Bracket, and the hardware for the top mounting holes (use your existing fender bolts for the side mounting holes) and hardware to secure the rod ends to the mounting brackets.\u003c\/p\u003e\n\u003cp\u003eAttention:  This bar may not work with cars that have the HEI style (taller) distributor.  Also, the pics of the Bar installed on the car and the install video is of a 1966 Mustang, but this Bar will fit in the same manner and location on the 1967-1968 Mustang (I will update once I have pics).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-03-10T17:51:26-07:00","created_at":"2026-03-10T17:28:23-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Monte Carlo Bar","tags":[],"variants":[{"id":51465457992001,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"875ALU_B3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"139.95","grams":1474,"compare_at_price":null,"position":1,"product_id":10191104770369,"created_at":"2026-03-10T17:28:23-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":63982320156993,"created_at":"2026-03-10T17:49:37-07:00","position":1,"updated_at":"2026-03-10T17:51:03-07:00","product_id":10191104770369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6005.jpg?v=1773190263","width":4032,"height":3024},{"id":63982320124225,"created_at":"2026-03-10T17:49:37-07:00","position":2,"updated_at":"2026-03-10T17:51:03-07:00","product_id":10191104770369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6006.jpg?v=1773190263","width":4032,"height":3024},{"id":63982320189761,"created_at":"2026-03-10T17:49:37-07:00","position":3,"updated_at":"2026-03-10T17:50:51-07:00","product_id":10191104770369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_6003.jpg?v=1773190251","width":4032,"height":3024},{"id":40911474557249,"created_at":"2023-04-11T17:09:53-07:00","position":4,"updated_at":"2026-03-10T17:50:51-07:00","product_id":10191104770369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/2_06857033-7b63-4243-ae75-6e2477b42c4b.jpg?v=1773190251","width":4032,"height":3024},{"id":40911474590017,"created_at":"2023-04-11T17:09:53-07:00","position":5,"updated_at":"2026-03-10T17:50:51-07:00","product_id":10191104770369,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/1_f04295b0-4e24-47b8-93ee-a696a801acac.jpg?v=1773190251","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10184716255553,"title":"Front Crossmember","handle":"front-crossmember","body_html":"\u003cp\u003e\u003cstrong\u003eA must-have upgrade for your Classic Mustang!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Crossmember will fit the 1964-1966 Mustang (possibly other years and models too) and it is designed to install in the same location as the factory front Crossmember, but it also ties in the pivot points of the lower control arms mounts into a single system for improved handling and steering feel.\u003c\/p\u003e\n\u003cp\u003eThe Crossmember is powder coated in satin black for a long-lasting, durable finish and it matches just about anything in anyone's engine bay.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One Crossmember, two new Crossmember-to-Frame mounting bolts, and a set of Grade 8 mounting hardware to replace the nuts, bolts, and washers for the lower control arm pivot mounting points.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-03-05T15:46:52-08:00","created_at":"2026-03-05T15:00:59-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Crossmember","tags":[],"variants":[{"id":51445359870273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6466CRMB_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"289.95","grams":2835,"compare_at_price":null,"position":1,"product_id":10184716255553,"created_at":"2026-03-05T15:00:59-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":63898703921473,"created_at":"2026-03-05T15:07:46-08:00","position":1,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5985.jpg?v=1773430787","width":4032,"height":3024},{"id":63898703954241,"created_at":"2026-03-05T15:07:46-08:00","position":2,"updated_at":"2026-03-05T15:08:40-08:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5986.jpg?v=1772752120","width":4032,"height":3024},{"id":63898703888705,"created_at":"2026-03-05T15:07:46-08:00","position":3,"updated_at":"2026-03-05T15:08:40-08:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5984.jpg?v=1772752120","width":4032,"height":3024},{"id":63898704445761,"created_at":"2026-03-05T15:08:13-08:00","position":4,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5977.jpg?v=1773430787","width":5712,"height":4284},{"id":63898704773441,"created_at":"2026-03-05T15:08:30-08:00","position":5,"updated_at":"2026-03-13T12:39:47-07:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5979.jpg?v=1773430787","width":5712,"height":4284},{"id":63898705002817,"created_at":"2026-03-05T15:08:33-08:00","position":6,"updated_at":"2026-03-05T15:08:36-08:00","product_id":10184716255553,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5980.jpg?v=1772752116","width":5712,"height":4284}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10162596544833,"title":"S550 Parking Brake Cable to F100 Cable Adapter Kit","handle":"s550-parking-brake-cable-to-f100-cable-adapter-kit","body_html":"\u003cp\u003e\u003cstrong\u003eThe stock Parking Brake Cables on the S550 rear assembly can work with the factory parking brake system, but they need a little help.  This kit provides a way to secure the S550 parking cable to the F100 cross member, and includes a threaded extension bar for the brake equalizer\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe part of the S550 Parking Brake Cable that mounts to the vehicle does not fit the holes in the cross member below the bed of the 1976-1972 F100 where the factory parking brake cable is secured.  This kit includes a stainless steel bracket (and mounting hardware) that is sized to fit the S550 cables and allows them to be mounted to the cross member below the bed in the same location as the stock cable.  The kit also includes an extended threaded bar to reach from the stock parking brake pivot assembly under the bed of the truck to the equalizer bar.  If you are attempting to use this kit with the long bed trucks, you will need extension cables to reach from the S500 cables to the equalizer bar (like the extension pieces that are already on the long bed F100 trucks).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eInstallation is simple, place the bracket on the front edge of the cross member and center it with holes in the brackets and the holes in the cross member.  Mark the smaller center hole location on the cross member to be drilled.  Remove the bracket and drill the single hole with a 5\/16\" drill bit.  Reinstall the bracket on the opposite face of the cross member where you just drilled the hole, and secure it with the included nut and bolt, but don't tighten completely yet.  Feed the S550 cables through the larger rear holes on the cross member and click them into the new stainless steel bracket.  Finish tightening the singe bolt in the bracket.  Install the equalizer on the two cable ends.  Remove the two jam nuts off the extension bar, feed it into the stock parking brake pivot system, slide the bar into the equalizer and thread on the two nuts.  Tighten the two nuts to your desired location to ensure proper parking brake engagement.  See link to installation video.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eIf you have the long bed 1967-1972 F100 truck, you will need to use the parking brake extension cables already in place on the truck.  These are roughly 16 inches long.  You'll need to verify you have these extensions before ordering this kit for the long bed trucks.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One stainless steel mounting bracket, the nut and bolt to secure it to the cross member, and one threaded extension bar (see pics).\u003c\/p\u003e","published_at":"2026-02-19T15:58:35-08:00","created_at":"2026-02-05T14:37:18-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Standard to Metric Brake Adapter","tags":[],"variants":[{"id":51371701600577,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FSPBB12","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"34.95","grams":142,"compare_at_price":null,"position":1,"product_id":10162596544833,"created_at":"2026-02-05T14:37:18-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":63475045859649,"created_at":"2026-02-05T14:39:40-08:00","position":1,"updated_at":"2026-02-05T14:45:05-08:00","product_id":10162596544833,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5830.jpg?v=1770331505","width":4032,"height":3024},{"id":63475045826881,"created_at":"2026-02-05T14:39:40-08:00","position":2,"updated_at":"2026-02-05T14:45:05-08:00","product_id":10162596544833,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5829.jpg?v=1770331505","width":5712,"height":4284},{"id":63475045892417,"created_at":"2026-02-05T14:39:40-08:00","position":3,"updated_at":"2026-02-05T14:39:42-08:00","product_id":10162596544833,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5831.jpg?v=1770331182","width":4032,"height":3024},{"id":63475045925185,"created_at":"2026-02-05T14:39:40-08:00","position":4,"updated_at":"2026-02-05T14:39:42-08:00","product_id":10162596544833,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/Screenshot2026-01-30164004.jpg?v=1770331182","width":2299,"height":1289}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10097483514177,"title":"S550 Metric to Standard Brake Line Adapter","handle":"s550-metric-to-standard-brake-line-adapter","body_html":"\u003cp\u003e\u003cstrong\u003eThe Brake Line Adapter will allow the common 3\/8-24 Inverted Flare 3\/16\" Brake Line to match up to the M10x1.5 Bubble Flare Brake Line on the S550 Rear Differential Assembly\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eIt is difficult to find the correct adapter to go from standard brake line sizing to metric brake line sizing, especially on modded and upgraded parts for classic vehicles.  This 3\/16\" hard brake line has a 3\/8-24 Inverted Flare fitting on one end, and an M10x1.5 Bubble Flare fitting on the other end.  There is a 3\/8-24 Inverted Flare female to female coupler included in this kit, just in case you need it.  The hard line is roughly 8 inches long, which allows for some shaping to the line if needed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWhile there are several vehicles out there with the M10x1.5 Bubble Flare brake line fittings, it is popular to swap the S550 Mustang Rear Carrier Assembly to the F100 from the 60s and 70s, this brake line adapter is to make that swap easier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEnd 1: 3\/8-24 Inverted Flare, Male, with an 3\/8-24 Inverted Flare Female to Female Coupler, just in case\u003c\/p\u003e\n\u003cp\u003eEnd 2: M10x1.5 Bubble Flare, Male\u003c\/p\u003e\n\u003cp\u003eBrake Line: 3\/16\" steel, about 8 inches long\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eOrdering a quantity of 1 gets you a single brake line adapter, despite the pics showing multiple lines in the background.  If you need 2, make sure your cart has a quantity of 2 of this item before you check out.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One brake line adapter.\u003c\/p\u003e","published_at":"2026-01-14T16:29:30-08:00","created_at":"2025-12-17T13:43:46-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Standard to Metric Brake Adapter","tags":[],"variants":[{"id":51137836777793,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"832KSCR_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"24.95","grams":85,"compare_at_price":null,"position":1,"product_id":10097483514177,"created_at":"2025-12-17T13:43:46-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62824590606657,"created_at":"2025-12-17T13:54:11-08:00","position":1,"updated_at":"2025-12-17T13:54:13-08:00","product_id":10097483514177,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5589.jpg?v=1766008453","width":4032,"height":3024},{"id":62824590639425,"created_at":"2025-12-17T13:54:11-08:00","position":2,"updated_at":"2025-12-17T13:54:13-08:00","product_id":10097483514177,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5588.jpg?v=1766008453","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10097439179073,"title":"S550 Temperature Sensor Plug","handle":"s550-temperature-sensor-plug","body_html":"\u003cp\u003e\u003cstrong\u003ePlug the threaded hole in the S550 Rear Differential Cover for the Temperature Sensor\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe allen-head plug is for those that want to remove the temperature sensor (or if yours is damaged or missing) in the lower portion of the S550 rear differential cover.  This plug will keep dirt and debris out of the threaded hole in the cover.  While the whole for the temp sensor does not go through the cover and into the differential cavity with the fluid, there's no reason to allow dirt and grime to get stuck in there.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlug: M10x1.5 thread\u003c\/p\u003e\n\u003cp\u003eAllen wrench size: 5mm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eOrdering a quantity of 1 gets you a single plug, despite the pics showing multiple plugs in the background.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One plug for the threaded hole for the temperature sensor in a S550 Rear Diff Cover.\u003c\/p\u003e","published_at":"2026-01-14T16:29:16-08:00","created_at":"2025-12-17T13:27:40-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Temp Sensor Plug","tags":[],"variants":[{"id":51137573257537,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"832KSCR_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"2.95","grams":28,"compare_at_price":null,"position":1,"product_id":10097439179073,"created_at":"2025-12-17T13:27:40-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62824368111937,"created_at":"2025-12-17T13:37:38-08:00","position":1,"updated_at":"2025-12-17T13:37:40-08:00","product_id":10097439179073,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5585.jpg?v=1766007460","width":4032,"height":3024},{"id":62824368144705,"created_at":"2025-12-17T13:37:38-08:00","position":2,"updated_at":"2025-12-17T13:37:40-08:00","product_id":10097439179073,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5586.jpg?v=1766007460","width":4032,"height":3024},{"id":62824368177473,"created_at":"2025-12-17T13:37:38-08:00","position":3,"updated_at":"2025-12-17T13:37:40-08:00","product_id":10097439179073,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5587.jpg?v=1766007460","width":4032,"height":3024},{"id":62824368210241,"created_at":"2025-12-17T13:37:38-08:00","position":4,"updated_at":"2025-12-17T13:37:40-08:00","product_id":10097439179073,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/Pluglocation.jpg?v=1766007460","width":1564,"height":880},{"id":62824368243009,"created_at":"2025-12-17T13:37:38-08:00","position":5,"updated_at":"2025-12-17T13:37:40-08:00","product_id":10097439179073,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/TempSensor.jpg?v=1766007460","width":1701,"height":957}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10104875811137,"title":"Custom Wheel Cap for AR Torq Thrust Wheels 2-1\/8\" - Machined","handle":"custom-wheel-cap-for-ar-torq-thrust-wheels-2-1-8-machined","body_html":"\u003ch3\u003e\n\u003cstrong\u003eThese caps are sold in pairs, ordering \"1\" will get you two wheel caps.  So if you'd like a set of four caps for your vehicle, make sure the quantity says 2 in your cart.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis cap is designed to fit the American Racing Torq Thrust wheels that have the 2-1\/8\" fastener spacing, and provide clearance for the dust cap on the end of the front axles.  This \"smaller\" spacing tends to be found on the older American Racing Torq Thrust Wheels.\u003c\/p\u003e\n\u003cp\u003eI feel the stock wheel caps provided by American Racing are too large and stick out too far, so I designed these caps to be a low profile option, while still looking like they came from the factory.\u003c\/p\u003e\n\u003cp\u003eThese caps are CNC machined from 1\/2\" thick 6061 Aluminum plate, here in the United States.  The back side of the wheel cap is bored out over 3\/8\" to clear most dust caps and Spindle ends.  Due to the nature of machined parts, some tooling marks can be seen.\u003c\/p\u003e\n\u003cp\u003eWhile these are designed to clear the dust caps on the front of some classic vehicles, they also work well on the rear wheels, completing the look around the whole vehicle.\u003c\/p\u003e\n\u003cp\u003eEach cap is shipped with five flat head cap screws for a flush, minimalist finish.\u003c\/p\u003e\n\u003cp\u003eThese caps fit a number of American Racing Wheels, including model numbers V40, V45, and some other models.\u003c\/p\u003e\n\u003cp\u003eThe simplest way to determine if these caps will fit your ARTT wheels, is to measure the distance from the center of one wheel cap threaded hole on the wheel to the far edge of the next wheel cap threaded hole.  These caps will fit those with a 2-1\/8\" distance (see pic).  The bolt pattern diameter for these caps is 3.55\", but it's not as easy to measure that diameter, that's why it's easier to measure the distance of the bolt holes themselves.\u003c\/p\u003e\n\u003cp\u003eIf your measurement is closer to 2-1\/4\" instead of 2-1\/8\", you'll want to check out my \u003ca href=\"https:\/\/krusebuilt.com\/products\/custom-wheel-cap-for-ar-torque-thrust-wheels\"\u003eother Wheel Caps with the larger fastener pattern\u003c\/a\u003e.  You must make sure you are ordering the correct wheel cap size.\u003c\/p\u003e\n\u003cp\u003eThe pictures of the caps on a classic Mustang are of my car with the ARTT wheels and the other cap style in place.  These 2-1\/8\" Caps bolt onto the wheel the same way.  I took the extra step to polish these caps, but polishing is not an option at this time.  The pictures of the caps off the car are how they look when you receive them.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eMAKE SURE YOU NEED THE 2-1\/8\" FASTENER SPACING STYLE BEFORE ORDERING.  YOU SHOULD DOUBLE CHECK BEFORE ORDERING.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2025-12-29T10:12:24-08:00","created_at":"2025-12-29T09:21:10-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Wheel Cap","tags":[],"variants":[{"id":51171513073985,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WC212.1_MFP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"49.95","grams":181,"compare_at_price":"65.00","position":1,"product_id":10104875811137,"created_at":"2025-12-29T09:21:10-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62928607871297,"created_at":"2025-12-29T10:06:54-08:00","position":1,"updated_at":"2025-12-29T10:07:15-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5654.jpg?v=1767031635","width":4032,"height":3024},{"id":62928608002369,"created_at":"2025-12-29T10:06:57-08:00","position":2,"updated_at":"2025-12-29T10:07:15-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5655.jpg?v=1767031635","width":4032,"height":3024},{"id":62928608133441,"created_at":"2025-12-29T10:07:00-08:00","position":3,"updated_at":"2025-12-29T10:07:15-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/2.125Distance..jpg?v=1767031635","width":4032,"height":3024},{"id":39942333137217,"created_at":"2022-12-01T15:20:04-08:00","position":4,"updated_at":"2025-12-29T13:21:14-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/1mod.jpg?v=1767043274","width":4032,"height":2268},{"id":39942341263681,"created_at":"2022-12-01T15:23:38-08:00","position":5,"updated_at":"2025-12-29T13:21:14-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/2mod.jpg?v=1767043274","width":4032,"height":2268},{"id":39942332547393,"created_at":"2022-12-01T15:19:28-08:00","position":6,"updated_at":"2025-12-29T13:21:14-08:00","product_id":10104875811137,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/3mod.jpg?v=1767043274","width":4032,"height":2268}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10090313220417,"title":"Heater Delete Plate - 69 \u0026 70 Mustang","handle":"heater-delete-plate-69-70-mustang","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHeater Delete Block-Off Plate!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Block Off Plate will fit the 1969-1970 Mustang (possibly other years and models too) and it is designed to cover the holes in the firewall where the heater motor and the two coolant lines passed through.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Plate is made from 6061 Aluminum and is powder coated black for a stealth, long lasting look\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e.  The kit also includes the hardware needed to secure the Plate to the firewall, and a gasket to help keep heat and debris from entering into the passenger compartment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe contents of the kit can be seen in more detail in the link of the YouTube video , and it explains how you customize it and install it on your vehicle.  T\u003c\/span\u003ehe video for the install is for the 1964-1968 Mustang, but the install process is the same for this Plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One powder coated 6061 aluminum plate, four bolts and four nuts to secure the plate, and a adhesive-backed gasket that you will apply before installation into your vehicle.\u003c\/p\u003e","published_at":"2025-12-20T09:39:00-08:00","created_at":"2025-12-10T17:00:02-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Heater Delete Plate","tags":[],"variants":[{"id":51115265622337,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6970HBP_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"44.95","grams":680,"compare_at_price":null,"position":1,"product_id":10090313220417,"created_at":"2025-12-10T17:00:02-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62861005685057,"created_at":"2025-12-20T09:35:07-08:00","position":1,"updated_at":"2025-12-20T09:35:44-08:00","product_id":10090313220417,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5613.jpg?v=1766252144","width":4032,"height":3024},{"id":62861005717825,"created_at":"2025-12-20T09:35:07-08:00","position":2,"updated_at":"2025-12-20T09:35:44-08:00","product_id":10090313220417,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5615.jpg?v=1766252144","width":4032,"height":3024},{"id":62861005750593,"created_at":"2025-12-20T09:35:07-08:00","position":3,"updated_at":"2025-12-20T09:35:44-08:00","product_id":10090313220417,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5614.jpg?v=1766252144","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10046422319425,"title":"Shifter Boot Mount Plate","handle":"shifter-boot-mount-plate","body_html":"\u003cp\u003eThis mount plate is designed to work with the Hurst Shifter Boot (part number 1144580) and other common shifter boots that have a trim ring sized 6.5\" x 5.25\".  We all know how difficult it can be to install the aftermarket shifter boots, and the hardware they include doesn't always work.  This mount plate is designed to simplify the install and removing the boot and trim ring easily repeatable without needing to find the holes you drilled through your carpet and into the sheet metal below.\u003c\/p\u003e\n\u003cp\u003eThis template is designed to be used on any number of vehicle types and sizes, and with a lot of aftermarket shift boots available.  Please be sure the screw hole pattern in the trim ring of your shifter boot matches the pattern of this mount (5-5\/16\" x 4-1\/4\").\u003c\/p\u003e\n\u003cp\u003eSimply utilize the included self-tapping screws to secure the mount plate to the transmission tunnel of your vehicle, and utilize the included trim ring screws to mount the boot and trim ring to the Shifter Boot Mount Plate.  The self-tapping screws use a 5\/16\" socket, and you'll also need a Phillips-head screw driver.\u003c\/p\u003e\n\u003cp\u003eTemplate is made in the USA and from a beefy piece of 1\/8\" Aluminum that can be used on many vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included in the Kit:\u003c\/strong\u003e One aluminum mount plate, four self-tapping screws, and four 8-32 x 1\/2\" screws for the trim ring.\u003c\/p\u003e","published_at":"2025-11-07T16:09:52-08:00","created_at":"2025-10-29T13:47:46-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Shifter Boot Mount Plate","tags":[],"variants":[{"id":50949827789121,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SBP832_A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"16.95","grams":99,"compare_at_price":null,"position":1,"product_id":10046422319425,"created_at":"2025-10-29T13:47:46-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62349277856065,"created_at":"2025-10-29T14:03:16-07:00","position":1,"updated_at":"2025-10-29T14:03:18-07:00","product_id":10046422319425,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5175.jpg?v=1761771798","width":5712,"height":4284},{"id":62349277888833,"created_at":"2025-10-29T14:03:16-07:00","position":2,"updated_at":"2025-10-29T14:03:18-07:00","product_id":10046422319425,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5176.jpg?v=1761771798","width":5712,"height":4284},{"id":62349277921601,"created_at":"2025-10-29T14:03:16-07:00","position":3,"updated_at":"2025-10-29T14:03:18-07:00","product_id":10046422319425,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5177.jpg?v=1761771798","width":5712,"height":4284},{"id":62435142893889,"created_at":"2025-11-07T16:08:16-08:00","position":4,"updated_at":"2025-11-07T16:08:19-08:00","product_id":10046422319425,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5311.jpg?v=1762560499","width":4032,"height":3024},{"id":62435142926657,"created_at":"2025-11-07T16:08:22-08:00","position":5,"updated_at":"2025-11-07T16:08:24-08:00","product_id":10046422319425,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_5314.jpg?v=1762560504","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10027107483969,"title":"Fuel Pressure Gauge","handle":"fuel-pressure-gauge","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eA stealth looking, under-hood, Fuel Pressure Gauge!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Fuel Pressure Gauge kit is designed to work with fuel lines that have a -6AN fitting as it sits between the fuel line from the fuel pump to the fuel inlet line on the Carb.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Fuel Pressure Gauge reads from 0psi to 15psi, which covers most carbureted engines as the fuel pressure is usually less than 15psi.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe pressure gauge threads into an adapter with male and female -6AN fittings.  If your fuel line does not have these fitting, you can buy additional adapter pieces to convert the various types of fuel lines and fittings found on most carbureted engines.  Or, you can upgrade your fuel line with of my braided fuel lines that includes a -6AN fitting on the carburetor end of the fuel line.  I offer \u003ca href=\"https:\/\/krusebuilt.com\/products\/fuel-line-kit-silver\"\u003eBraided Stainless Steel\u003c\/a\u003e and \u003ca href=\"https:\/\/krusebuilt.com\/products\/custom-fuel-line-kit-black\"\u003eBlack Nylon Braided\u003c\/a\u003e lines that fit most Ford fuel pumps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"color: #000000;\"\u003eIf you're looking for a perfectly sized and stealthy fuel filter, I am selling them here: \u003ca href=\"https:\/\/krusebuilt.com\/products\/fuel-filter\"\u003ehttps:\/\/krusebuilt.com\/products\/fuel-filter\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWith lots of aftermarket fuel pumps and carburetor fuel inlet lines available, it is difficult to ensure compatibility with the included hardware and every combination out there.  It is up to the buyer to determine compatibility before purchase.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One 0-15psi Fuel Pressure Gauge, and one adapter with male and female -6AN fitting ends.\u003c\/p\u003e","published_at":"2025-10-04T09:11:26-07:00","created_at":"2025-10-03T07:47:36-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fuel Pressure Gauge","tags":[],"variants":[{"id":50872563073345,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"FPG015_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"29.95","grams":113,"compare_at_price":null,"position":1,"product_id":10027107483969,"created_at":"2025-10-03T07:47:36-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62102786867521,"created_at":"2025-10-03T08:27:05-07:00","position":1,"updated_at":"2025-10-03T08:27:07-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4958.jpg?v=1759505227","width":4032,"height":3024},{"id":62102786900289,"created_at":"2025-10-03T08:27:09-07:00","position":2,"updated_at":"2025-10-03T08:27:11-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4957.jpg?v=1759505231","width":4032,"height":3024},{"id":62102786965825,"created_at":"2025-10-03T08:27:12-07:00","position":3,"updated_at":"2025-10-03T08:27:13-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4959.jpg?v=1759505233","width":4032,"height":3024},{"id":62102787031361,"created_at":"2025-10-03T08:27:15-07:00","position":4,"updated_at":"2025-10-03T08:27:17-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4956.jpg?v=1759505237","width":4032,"height":3024},{"id":62102787129665,"created_at":"2025-10-03T08:27:23-07:00","position":5,"updated_at":"2025-10-03T08:27:39-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4953.jpg?v=1759505259","width":4032,"height":3024},{"id":62102787096897,"created_at":"2025-10-03T08:27:20-07:00","position":6,"updated_at":"2025-10-03T08:27:39-07:00","product_id":10027107483969,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4954.jpg?v=1759505259","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10026447044929,"title":"Throttle Return Springs","handle":"throttle-return-spring","body_html":"\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eThrottle Return Springs with spring mount!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis Throttle Return Spring set fits most Carbs and throttle setups.  The mount is universal in the position it sits, as well as where you want to attach the springs so it best fits your application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhile a single spring can be used, it is recommended that both springs are used to ensure the throttle closes once you lift your foot off the throttle.  The Spring Mount can be positioned in front of or behind the Carb, to best fit your application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One pair of throttle return springs, and one spring mount.\u003c\/p\u003e","published_at":"2025-10-02T08:07:54-07:00","created_at":"2025-10-02T07:57:33-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Throttle Return Springs","tags":[],"variants":[{"id":50868354810177,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TRSK_C","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"9.95","grams":71,"compare_at_price":null,"position":1,"product_id":10026447044929,"created_at":"2025-10-02T07:57:33-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":62096471556417,"created_at":"2025-10-02T08:04:55-07:00","position":1,"updated_at":"2025-10-02T08:04:58-07:00","product_id":10026447044929,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4950.jpg?v=1759417498","width":4032,"height":3024},{"id":62096472146241,"created_at":"2025-10-02T08:05:07-07:00","position":2,"updated_at":"2025-10-02T08:05:09-07:00","product_id":10026447044929,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4952.jpg?v=1759417509","width":4032,"height":3024},{"id":62096472310081,"created_at":"2025-10-02T08:05:09-07:00","position":3,"updated_at":"2025-10-02T08:05:12-07:00","product_id":10026447044929,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4948.jpg?v=1759417512","width":4032,"height":3024},{"id":62096472375617,"created_at":"2025-10-02T08:05:11-07:00","position":4,"updated_at":"2025-10-02T08:05:13-07:00","product_id":10026447044929,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4949.jpg?v=1759417513","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":10005796651329,"title":"Export Brace","handle":"export-brace","body_html":"\u003cp\u003e\u003cstrong\u003eUpgrade your suspension and chassis stiffness with this custom Export Brace.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Export Brace will fit the 1964-1970 Mustang (67-70 Cougars, and possibly other years and models too) and it is designed to add support to the shock towers by bracing them on the stronger firewall.  No need to worry about fitment between the shock towers as this kit includes adjustable threaded tubes and beefy Rod Ends to fine tune the fitment for your vehicle.\u003c\/p\u003e\n\u003cp\u003eThe main brace is CNC'd from 6061 Aluminum, as well as the shock tower mounts.  This kit also includes a support brace that ties the main brace to an additional mounting point on the firewall.  The main brace, shock mounts, and adjustable tubing are all powder coated black for that long lasting, stealth look.\u003c\/p\u003e\n\u003cp\u003eCheck out the install video \u003ca href=\"https:\/\/youtu.be\/-PpuKNvldK8\" title=\"HERE\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One aluminum main brace, two aluminum shock tower mounts, two aluminum adjustable threaded tubes, one steel support bracket (for back of firewall), and all the associated mounting hardware!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-09-25T15:57:31-07:00","created_at":"2025-09-04T21:00:08-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Support Brace","tags":[],"variants":[{"id":50777186795841,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3824EXBR_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"284.95","grams":2608,"compare_at_price":null,"position":1,"product_id":10005796651329,"created_at":"2025-09-04T21:00:08-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":61943765958977,"created_at":"2025-09-11T13:08:53-07:00","position":1,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4721.jpg?v=1757621354","width":4032,"height":3024},{"id":61943765696833,"created_at":"2025-09-11T13:08:45-07:00","position":2,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4719.jpg?v=1757621354","width":4032,"height":3024},{"id":61943766417729,"created_at":"2025-09-11T13:08:58-07:00","position":3,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4720.jpg?v=1757621354","width":4032,"height":3024},{"id":61942545121601,"created_at":"2025-09-11T06:52:14-07:00","position":4,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4691.jpg?v=1757621354","width":4032,"height":3024},{"id":61942545252673,"created_at":"2025-09-11T06:52:18-07:00","position":5,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4692.jpg?v=1757621354","width":4032,"height":3024},{"id":61942545318209,"created_at":"2025-09-11T06:52:21-07:00","position":6,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4690.jpg?v=1757621354","width":4032,"height":3024},{"id":61942545383745,"created_at":"2025-09-11T06:52:23-07:00","position":7,"updated_at":"2025-09-11T13:09:14-07:00","product_id":10005796651329,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4689.jpg?v=1757621354","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9999597830465,"title":"Heater Delete Plate - Black","handle":"heater-delete-plate-black","body_html":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eHeater Delete Block-Off Plate!\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Block Off Plate will fit the 1964-1968 Mustang (possibly other years and models too) and it is designed to cover the holes in the firewall where the heater motor and coolant lines passed through.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Plate is made from 6061 Aluminum and is powder coated black for a stealth, long lasting look\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e.  The kit also includes the hardware needed to secure the Plate to the firewall, and a gasket to help keep heat and debris from entering into the passenger compartment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe contents of the kit can be seen in more detail in the link of the YouTube video , and it explains how you customize it and install it on your vehicle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe video for the install mentions this fitting the '64-'66 Mustang, but it will fit the 1967 and 1968 Mustang as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One powder coated 6061 aluminum plate, four bolts and four nuts to secure the plate, and a adhesive-backed gasket that you will apply before installation into your vehicle.\u003c\/p\u003e","published_at":"2025-09-11T15:59:52-07:00","created_at":"2025-08-26T06:13:54-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Heater Delete Plate","tags":[],"variants":[{"id":50749460676929,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1420HBP_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"43.95","grams":567,"compare_at_price":null,"position":1,"product_id":9999597830465,"created_at":"2025-08-26T06:13:54-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":61898406068545,"created_at":"2025-09-04T09:51:04-07:00","position":1,"updated_at":"2025-09-04T09:51:06-07:00","product_id":9999597830465,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4675.jpg?v=1757004666","width":4032,"height":3024},{"id":61898406101313,"created_at":"2025-09-04T09:51:04-07:00","position":2,"updated_at":"2025-09-04T09:51:06-07:00","product_id":9999597830465,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4676.jpg?v=1757004666","width":4032,"height":3024},{"id":61898406134081,"created_at":"2025-09-04T09:51:04-07:00","position":3,"updated_at":"2025-09-04T09:51:06-07:00","product_id":9999597830465,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4677.jpg?v=1757004666","width":4032,"height":3024},{"id":61898406166849,"created_at":"2025-09-04T09:51:04-07:00","position":4,"updated_at":"2025-09-04T09:51:06-07:00","product_id":9999597830465,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4678.jpg?v=1757004666","width":4032,"height":3024},{"id":61899826495809,"created_at":"2025-09-04T15:20:46-07:00","position":5,"updated_at":"2025-09-04T15:20:48-07:00","product_id":9999597830465,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4683.jpg?v=1757024448","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9995483119937,"title":"Electric Fan Switch with Label and Relay!","handle":"electric-fan-switch-with-label-and-relay","body_html":"\u003cp\u003e\u003cstrong\u003eElectric Fan Override Switch with Relay\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eIt's a good idea to have the option to turn on your electric fan(s) in the event your temperature sensor becomes inoperable and fails to trigger the fan(s) for cooling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis switch has two positions, one for \"Auto\" which lets the electric fan(s) to be triggered by the current trigger method, and the second position is for \"Override\" which allows for the fans to be triggered be activating this toggle switch.  Most electric fan setups rely on a relay to provide power to the fan(s), this switch intercepts the ground wire for that relay.  The ground wire from the relay connects to the center post of this toggle switch, one of the two outer terminals connects to the currently installed temperature switch, and the other outer terminal connects to a good ground. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHole for Toggle switch: must be 1\/2\" diameter \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eThis toggle switch is designed to be used with a relay system to power your electric fan(s) and be installed in line of the ground wire for the relay.  This toggle switch is not setup to be installed in between the power wire from the battery to the fan(s).  Please do your own research to determine if you can use this toggle switch to override the operation of your electric fan(s).\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included relay is designed to power a single fan while still allowing manual override via the switch. It is rated for 40 amps of continuous use—ensure that your fan's current draw does not exceed this rating. Please note that the wire colors on the included relay harness differ from those shown in the video; however, the terminal numbers remain consistent, which is the critical detail for proper installation. The relay also features a convenient mounting tab, with slotted sides that allow multiple relays to be joined together in a row.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eIf you are using two or more Fans, it is recommended you use an individual Relay for each Fan, unless the cumulative amperage for all Fans are at or below 40 Amps.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One toggle switch, one adhesive-backed placard for labeling switch, wiring to aid in installation, mounting nuts, black toggle cover for stealth look.  You will also get one standard automotive 12V 40A relay with wiring harness.\u003c\/p\u003e","published_at":"2025-08-17T08:49:16-07:00","created_at":"2025-08-17T08:26:50-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fan Switch","tags":[],"variants":[{"id":50727177617729,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TSR01_EF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"19.95","grams":128,"compare_at_price":null,"position":1,"product_id":9995483119937,"created_at":"2025-08-17T08:26:50-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":61712136569153,"created_at":"2025-08-17T08:37:40-07:00","position":1,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9995483119937,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4552.jpg?v=1755445622","width":4032,"height":3024},{"id":61712139485505,"created_at":"2025-08-17T08:37:44-07:00","position":2,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9995483119937,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4553.jpg?v=1755445622","width":4032,"height":3024},{"id":47184306012481,"created_at":"2024-09-19T11:19:52-07:00","position":3,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9995483119937,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3135.jpg?v=1755445622","width":4032,"height":3024},{"id":47184310141249,"created_at":"2024-09-19T11:20:07-07:00","position":4,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9995483119937,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3139.jpg?v=1755445622","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9992840216897,"title":"Retaining Washers for Shock Tower Bolts","handle":"retaining-washers-for-shock-tower-bolts","body_html":"\u003cp\u003e\u003cstrong\u003eEasy to install and super helpful retaining washers for those pesky shock tower studs\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe carriage bolts in the top of each shock tower in the 1964-1973 Classic Mustangs (and other Ford vehicles) never seem to stay in place.  These retaining washers are designed to keep the bolts in place while being thin enough to not affect the installation of the Export Brace (if you have one) and the shock cap.  These will work with the factory 5\/16\" bolts, no need to get longer carriage bolts, use your stock bolts!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eSimply slide them over the bolt and let them do their magic!  You can see in the pictures the bolts are positioned and ready for the shock cap.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFits 5\/16\" fasteners\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eThese Retaining Washers are designed to work with the 5\/16\" carriage bolts for shock towers on Classic Mustangs and other Ford vehicles of the same era.  Make sure you have 5\/16\" bolts before ordering.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One set of six retaining rings for 5\/16\" bolts.\u003c\/p\u003e","published_at":"2025-08-14T19:38:29-07:00","created_at":"2025-08-14T19:10:46-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Thumb Screws","tags":[],"variants":[{"id":50715819934017,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"516RR_Z","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"3.95","grams":14,"compare_at_price":null,"position":1,"product_id":9992840216897,"created_at":"2025-08-14T19:10:46-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":61675114627393,"created_at":"2025-08-14T19:34:49-07:00","position":1,"updated_at":"2025-08-14T19:35:04-07:00","product_id":9992840216897,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4499_arrows.jpg?v=1755225304","width":4032,"height":3024},{"id":61674844094785,"created_at":"2025-08-14T19:15:14-07:00","position":2,"updated_at":"2025-08-14T19:35:04-07:00","product_id":9992840216897,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4500.jpg?v=1755225304","width":4032,"height":3024},{"id":61674843242817,"created_at":"2025-08-14T19:15:13-07:00","position":3,"updated_at":"2025-08-14T19:35:04-07:00","product_id":9992840216897,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4538.jpg?v=1755225304","width":4032,"height":3024},{"id":61674843341121,"created_at":"2025-08-14T19:15:13-07:00","position":4,"updated_at":"2025-08-14T19:35:04-07:00","product_id":9992840216897,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4540.jpg?v=1755225304","width":4032,"height":3024},{"id":61674843930945,"created_at":"2025-08-14T19:15:14-07:00","position":5,"updated_at":"2025-08-14T19:35:04-07:00","product_id":9992840216897,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4539.jpg?v=1755225304","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9980722413889,"title":"Custom Wheel Cap for E-T Mag Wheels - Push In Style","handle":"custom-wheel-cap-for-e-t-mag-wheels-push-in-style","body_html":"\u003ch3\u003e\n\u003cspan style=\"color: rgb(255, 0, 0);\"\u003e\u003cstrong\u003eThese caps are sold in pairs, ordering \"1\" will get you two wheel caps.  If you'd like a set of four caps for your vehicle, make sure the quantity says 2 in your cart.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis cap is designed to fit the E-T Mags wheels and fit most of their wheels that accept Push-In style wheel caps.  I think the stock wheel caps provided by E-T Mags are too large and stick out too far, so I designed these caps to be a low profile option, while still looking like they came from the factory.\u003c\/p\u003e\n\u003cp\u003eThese caps are CNC machined from 3-1\/2\" diameter 6061 Aluminum rod, here in the United States.  The back side of the wheel cap is bored out, and there's 3 different pocket depths to choose from to best fit your vehicle.  Due to the nature of machined parts, some tooling marks can be seen.\u003c\/p\u003e\n\u003cp\u003eWhile these are designed to clear the dust caps on the front of some classic vehicles, they also work well on the rear wheels, completing the look around the whole vehicle.\u003c\/p\u003e\n\u003cp\u003eAnother great feature about these caps is they do not need to be removed in order to remove the wheel from the car.  These caps are designed to allow the standard socket tools to be used to remove the wheel and not be in the way.  Fantastic!!\u003c\/p\u003e\n\u003cp\u003eEach cap is shipped with an O-ring to ensure a snug fit of the Cap to your E-T Mag wheels.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe simplest way to determine if these caps will fit your E-T Mag wheels, is to measure the distance from the end of your spindle or dust cap (with the wheel mounted on the vehicle) to the face of the wheel (as shown in the video).  These caps will fit most E-T Mag wheels that accept push-in style Caps and have a bore of 81mm (3-3\/16\") diameter.  See cap fitment pic.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures of the caps on a classic Mustang are of my car with the E-T Mag wheels (model LT-III) and caps in place.  The pictures of the caps off the car are how they look when you receive them.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBe sure to select the wheel cap depth that works best for your vehicle!\u003c\/p\u003e","published_at":"2025-07-31T15:48:24-07:00","created_at":"2025-07-24T09:27:02-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Wheel Cap","tags":[],"variants":[{"id":50657258045761,"title":"1.15\" Pocket","option1":"1.15\" Pocket","option2":null,"option3":null,"sku":"ECT004.3","requires_shipping":true,"taxable":true,"featured_image":{"id":61322827399489,"product_id":9980722413889,"position":1,"created_at":"2025-07-24T10:59:18-07:00","updated_at":"2025-07-24T10:59:20-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/115_Pocket_-_Web.jpg?v=1753379960","variant_ids":[50657258045761]},"available":false,"price":"48.99","grams":181,"compare_at_price":null,"position":1,"product_id":9980722413889,"created_at":"2025-07-24T11:00:55-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50657262534977,"title":"1.00\" Pocket","option1":"1.00\" Pocket","option2":null,"option3":null,"sku":"ETC002.3","requires_shipping":true,"taxable":true,"featured_image":{"id":61322863345985,"product_id":9980722413889,"position":2,"created_at":"2025-07-24T11:04:30-07:00","updated_at":"2025-07-24T11:04:32-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/100_Pocket_-_Web.jpg?v=1753380272","variant_ids":[50657262534977]},"available":true,"price":"48.99","grams":181,"compare_at_price":null,"position":2,"product_id":9980722413889,"created_at":"2025-07-24T11:05:06-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50657264763201,"title":"0.50\" Pocket","option1":"0.50\" Pocket","option2":null,"option3":null,"sku":"ETC001.3","requires_shipping":true,"taxable":true,"featured_image":{"id":61322873504065,"product_id":9980722413889,"position":3,"created_at":"2025-07-24T11:05:38-07:00","updated_at":"2025-07-24T11:05:40-07:00","alt":null,"width":4032,"height":3024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/050_Pocket_-_Web.jpg?v=1753380340","variant_ids":[50657264763201]},"available":true,"price":"48.99","grams":181,"compare_at_price":null,"position":3,"product_id":9980722413889,"created_at":"2025-07-24T11:06:12-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":61322827399489,"created_at":"2025-07-24T10:59:18-07:00","position":1,"updated_at":"2025-07-24T10:59:20-07:00","product_id":9980722413889,"variant_ids":[50657258045761],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/115_Pocket_-_Web.jpg?v=1753379960","width":4032,"height":3024},{"id":61322863345985,"created_at":"2025-07-24T11:04:30-07:00","position":2,"updated_at":"2025-07-24T11:04:32-07:00","product_id":9980722413889,"variant_ids":[50657262534977],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/100_Pocket_-_Web.jpg?v=1753380272","width":4032,"height":3024},{"id":61322873504065,"created_at":"2025-07-24T11:05:38-07:00","position":3,"updated_at":"2025-07-24T11:05:40-07:00","product_id":9980722413889,"variant_ids":[50657264763201],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/050_Pocket_-_Web.jpg?v=1753380340","width":4032,"height":3024},{"id":61322942808385,"created_at":"2025-07-24T11:13:36-07:00","position":4,"updated_at":"2025-07-24T11:13:43-07:00","product_id":9980722413889,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/CapFitment.jpg?v=1753380823","width":1872,"height":1053},{"id":61322894606657,"created_at":"2025-07-24T11:08:03-07:00","position":5,"updated_at":"2025-07-24T11:13:43-07:00","product_id":9980722413889,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4378.jpg?v=1753380823","width":4032,"height":3024},{"id":61322896507201,"created_at":"2025-07-24T11:08:10-07:00","position":6,"updated_at":"2025-07-24T11:13:43-07:00","product_id":9980722413889,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4379.jpg?v=1753380823","width":4032,"height":3024},{"id":61322896802113,"created_at":"2025-07-24T11:08:15-07:00","position":7,"updated_at":"2025-07-24T11:13:43-07:00","product_id":9980722413889,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4382.jpg?v=1753380823","width":4032,"height":3024},{"id":61322897129793,"created_at":"2025-07-24T11:08:21-07:00","position":8,"updated_at":"2025-07-24T11:13:43-07:00","product_id":9980722413889,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_4383.jpg?v=1753380823","width":4032,"height":3024}],"options":[{"name":"E-T Mags","position":1,"values":["1.15\" Pocket","1.00\" Pocket","0.50\" Pocket"]}]},{"id":9894532317505,"title":"Water Pump Pulley Cap - Machined","handle":"water-pump-pulley-cap-machined","body_html":"\u003cp\u003eThis cap is designed to fit most Ford water pump pulley mounting configurations of the Small Block (SBF) and Large Block (FE) engines from the 1960s to the 1990s.  For those running electric fans (not the factory water pump mounted traditional fan), this Cap is a great way to jazz up and secure the pulley on the front of your water pump.\u003c\/p\u003e\n\u003cp\u003eThese caps are CNC machined from 5\/8\" thick 6061 Aluminum rod bar, here in the United States.  The back side of the wheel cap is bored out over 5\/8\" to clear most alignment studs on the water pump pulley mounting surface.  Due to the nature of machined parts, some tooling marks may be seen.\u003c\/p\u003e\n\u003cp\u003eWhen the factory manual fan blades are removed and you change to electric fans, the water pump pulley no longer has the security of the fan mounting face to firmly hold the pulley, forcing the four mounting bolts to do all the work.  This can lead to premature stresses on the pulley and can cause failure of the pulley at the mounting surface.\u003c\/p\u003e\n\u003cp\u003eTo check for proper fitment, the distance from the center of one bolt to the center of the bolt on the opposite side is 1.75 inches (44.5mm).  It is recommended you check your water pump bolt pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWhat's included: Each cap is shipped with four socket head cap screws and four lock washers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you would rather have a black powder coated piece instead, it can be found here: https:\/\/krusebuilt.com\/products\/water-pump-pulley-cap-black-powder-coat\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-03-22T11:00:11-07:00","created_at":"2025-03-21T20:26:12-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Pulley Cap","tags":[],"variants":[{"id":50303726453057,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WPPC625_P","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"25.95","grams":128,"compare_at_price":"0.00","position":1,"product_id":9894532317505,"created_at":"2025-03-21T20:26:12-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":60052827734337,"created_at":"2025-03-21T20:26:52-07:00","position":1,"updated_at":"2025-03-21T20:26:54-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S1.jpg?v=1742614014","width":4032,"height":3024},{"id":60052827701569,"created_at":"2025-03-21T20:26:52-07:00","position":2,"updated_at":"2025-03-21T20:26:54-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S2.jpg?v=1742614014","width":4032,"height":3024},{"id":60052827767105,"created_at":"2025-03-21T20:26:52-07:00","position":3,"updated_at":"2025-03-21T20:26:54-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S3.jpg?v=1742614014","width":4032,"height":3024},{"id":60055659774273,"created_at":"2025-03-22T11:00:03-07:00","position":4,"updated_at":"2025-03-22T11:00:05-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S4.jpg?v=1742666405","width":4032,"height":3024},{"id":60055659741505,"created_at":"2025-03-22T11:00:03-07:00","position":5,"updated_at":"2025-03-22T11:00:05-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S5.jpg?v=1742666405","width":4032,"height":3024},{"id":60055659708737,"created_at":"2025-03-22T11:00:03-07:00","position":6,"updated_at":"2025-03-22T11:00:05-07:00","product_id":9894532317505,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/S6.jpg?v=1742666405","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9894533464385,"title":"Water Pump Pulley Cap - Black Powder Coat","handle":"water-pump-pulley-cap-black-powder-coat","body_html":"\u003cp\u003eThis cap is designed to fit most Ford water pump pulley mounting configurations of the Small Block (SBF) and Large Block (FE) engines from the 1960s to the 1990s.  For those running electric fans (not the factory water pump mounted traditional fan), this Cap is a great way to jazz up and secure the pulley on the front of your water pump.\u003c\/p\u003e\n\u003cp\u003eThese caps are CNC machined from 5\/8\" thick 6061 Aluminum rod bar, here in the United States.  The back side of the wheel cap is bored out over 5\/8\" to clear most alignment studs on the water pump pulley mounting surface.  Due to the nature of machined parts, some tooling marks may be seen.  The Cap is powder coated black, for that stealth look.\u003c\/p\u003e\n\u003cp\u003eWhen the factory manual fan blades are removed and you change to electric fans, the water pump pulley no longer has the security of the fan mounting face to firmly hold the pulley, forcing the four mounting bolts to do all the work.  This can lead to premature stresses on the pulley and can cause failure of the pulley at the mounting surface.\u003c\/p\u003e\n\u003cp\u003eTo check for proper fitment, the distance from the center of one bolt to the center of the bolt on the opposite side is 1.75 inches (44.5mm).  It is recommended you check your water pump bolt pattern before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWhat's included: Each cap is shipped with four socket head cap screws and four lock washers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you would rather have a non-powder coated, machined piece instead, it can be found here:  https:\/\/krusebuilt.com\/products\/water-pump-pulley-cap-machined\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2025-03-22T10:59:48-07:00","created_at":"2025-03-21T20:44:19-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Pulley Cap","tags":[],"variants":[{"id":50303730549057,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WPPC625_B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"28.95","grams":128,"compare_at_price":"0.00","position":1,"product_id":9894533464385,"created_at":"2025-03-21T20:44:19-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":60052874166593,"created_at":"2025-03-21T20:46:27-07:00","position":1,"updated_at":"2025-03-21T20:46:29-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B1.jpg?v=1742615189","width":4032,"height":3024},{"id":60052874199361,"created_at":"2025-03-21T20:46:27-07:00","position":2,"updated_at":"2025-03-21T20:46:29-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B2.jpg?v=1742615189","width":4032,"height":3024},{"id":60052874232129,"created_at":"2025-03-21T20:46:27-07:00","position":3,"updated_at":"2025-03-21T20:46:29-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B3.jpg?v=1742615189","width":4032,"height":3024},{"id":60055658135873,"created_at":"2025-03-22T10:59:17-07:00","position":4,"updated_at":"2025-03-22T10:59:19-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B4.jpg?v=1742666359","width":4032,"height":3024},{"id":60055658201409,"created_at":"2025-03-22T10:59:17-07:00","position":5,"updated_at":"2025-03-22T10:59:19-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B5.jpg?v=1742666359","width":4032,"height":3024},{"id":60055658103105,"created_at":"2025-03-22T10:59:17-07:00","position":6,"updated_at":"2025-03-22T10:59:19-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B6.jpg?v=1742666359","width":4032,"height":3024},{"id":60055658168641,"created_at":"2025-03-22T10:59:17-07:00","position":7,"updated_at":"2025-03-22T10:59:19-07:00","product_id":9894533464385,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/B7.jpg?v=1742666359","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9894524977473,"title":"KruseBuilt Logo Flexfit Hat","handle":"krusebuilt-flexfit-hat","body_html":"\u003cp\u003eFinally a KruseBuilt Hat!!  This hat is the very popular Flexfit style with the red KruseBuilt logo embroidered on the front.  The embroidered logo is the \"puffy\" style so it stands out and it really pops with the black hat!\u003c\/p\u003e\n\u003cp\u003eThis is a high quality, 97% polyester and 3% spandex Flexfit hat.  Currently offered in the S\/M size and the L\/XL size.\u003c\/p\u003e\n\u003cp\u003eWhen ordering, select \"Small\" if you need the Small\/Medium fit, or select \"Large\" if you need the Large\/Extra Large size.  In the pictures, I am wearing the L\/XL hat and it fits me perfectly.\u003c\/p\u003e","published_at":"2025-03-21T19:38:02-07:00","created_at":"2025-03-21T19:20:12-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"T-Shirt","tags":[],"variants":[{"id":50303692833089,"title":"Small","option1":"Small","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"31.95","grams":227,"compare_at_price":null,"position":1,"product_id":9894524977473,"created_at":"2025-03-21T19:31:29-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50303698993473,"title":"Large","option1":"Large","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"31.95","grams":227,"compare_at_price":null,"position":2,"product_id":9894524977473,"created_at":"2025-03-21T19:36:38-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":60052424130881,"created_at":"2025-03-21T19:27:48-07:00","position":1,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat1.jpg?v=1742610470","width":4032,"height":3024},{"id":60052423934273,"created_at":"2025-03-21T19:27:48-07:00","position":2,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat2.jpg?v=1742610470","width":4032,"height":3024},{"id":60052423901505,"created_at":"2025-03-21T19:27:48-07:00","position":3,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat3.jpg?v=1742610470","width":4032,"height":3024},{"id":60052424032577,"created_at":"2025-03-21T19:27:48-07:00","position":4,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat4.jpg?v=1742610470","width":4032,"height":3024},{"id":60052423967041,"created_at":"2025-03-21T19:27:48-07:00","position":5,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat5.jpg?v=1742610470","width":4032,"height":3024},{"id":60052423999809,"created_at":"2025-03-21T19:27:48-07:00","position":6,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat6.jpg?v=1742610470","width":4032,"height":3024},{"id":60052424065345,"created_at":"2025-03-21T19:27:48-07:00","position":7,"updated_at":"2025-03-21T19:27:50-07:00","product_id":9894524977473,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/KBhat7.jpg?v=1742610470","width":4032,"height":3024}],"options":[{"name":"Size","position":1,"values":["Small","Large"]}]},{"id":9874517360961,"title":"Power Steering Pump Spacer for KRC Pumps","handle":"power-steering-pump-spacer-for-krc-pumps","body_html":"\u003cp\u003e\u003cstrong\u003eA 1\/16\" Spacer for KRC Elite Power Steering Pump\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis spacer will move the KRC Elite Power Steering Pump forward (towards the front of the vehicle) by 1\/16\", and it is designed be keep the pump mounted flat against the original mounting plate while aiding in the alignment of the power steering pump pulley with the water pump pulley. \u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003eThe Spacer is light weight aluminum it will allow the same bolt diameter to be used that was included with your KRC pump kit.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003eSpacer range: 1\/16\" (1.58mm)\u003c\/p\u003e\n\u003cp\u003eFor additional thickness, order more than one piece, for 1\/16\" spacing increments (i.e. if you need 1\/8\" spacing, order two pieces, etc).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eThe hardware you originally received with your KRC pump can be used with one spacer.  If you are using more than one spacer, you will need to acquire longer fasteners than what you have.  The bolt is 5\/16-18 thread, but you will need to determine the correct bolt length based on your choice of spacers.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One custom aluminum, water jet cut, 1\/16\" spacer when you order one piece.\u003c\/p\u003e","published_at":"2025-02-27T15:28:39-08:00","created_at":"2025-02-20T10:29:19-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Adjustable Alternator Linkage","tags":[],"variants":[{"id":50189610516801,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PSPS062","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"13.95","grams":28,"compare_at_price":null,"position":1,"product_id":9874517360961,"created_at":"2025-02-20T10:29:19-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":59791827370305,"created_at":"2025-02-27T15:27:56-08:00","position":1,"updated_at":"2025-02-27T15:27:58-08:00","product_id":9874517360961,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/1_2c558b6b-5845-4ac2-80bb-3cf36733f5f5.jpg?v=1740698878","width":4032,"height":3024},{"id":59791827403073,"created_at":"2025-02-27T15:27:56-08:00","position":2,"updated_at":"2025-02-27T15:27:58-08:00","product_id":9874517360961,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/2_832d99ff-f616-4903-b520-b94f2f0ec886.jpg?v=1740698878","width":4032,"height":3024},{"id":59791827468609,"created_at":"2025-02-27T15:27:57-08:00","position":3,"updated_at":"2025-02-27T15:27:59-08:00","product_id":9874517360961,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/3_9db410f6-177c-4981-b97e-5007cdecca28.jpg?v=1740698879","width":4032,"height":3024},{"id":59791827337537,"created_at":"2025-02-27T15:27:57-08:00","position":4,"updated_at":"2025-02-27T15:27:58-08:00","product_id":9874517360961,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/4_a5b9c37a-8783-4608-9adb-12a14005ac49.jpg?v=1740698878","width":4032,"height":3024},{"id":59791827435841,"created_at":"2025-02-27T15:27:57-08:00","position":5,"updated_at":"2025-02-27T15:27:58-08:00","product_id":9874517360961,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/5_a3bccd12-b55c-4c14-adb7-0479e76b0826.jpg?v=1740698878","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9861703565633,"title":"Premium Short Sleeve Shirt - KruseBuilt Stripes","handle":"premium-short-sleeve-shirt-krusebuilt","body_html":"\u003cp\u003eThis is next KruseBuilt shirt design, and this time it's a simple logo on the front, with the Red, White, and Blue stripes!\u003c\/p\u003e\n\u003cp\u003eThis is a high quality, smooth, breathable fabric shirt, designed to fit better than typical cotton shirts.\u003c\/p\u003e","published_at":"2025-02-08T13:16:02-08:00","created_at":"2025-02-08T13:10:25-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"T-Shirt","tags":[],"variants":[{"id":50078373413185,"title":"Medium","option1":"Medium","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"19.95","grams":227,"compare_at_price":null,"position":1,"product_id":9861703565633,"created_at":"2025-02-08T13:10:25-08:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50078373445953,"title":"Large","option1":"Large","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"19.95","grams":227,"compare_at_price":null,"position":2,"product_id":9861703565633,"created_at":"2025-02-08T13:10:25-08:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50078373478721,"title":"X-Large","option1":"X-Large","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"19.95","grams":227,"compare_at_price":null,"position":3,"product_id":9861703565633,"created_at":"2025-02-08T13:10:25-08:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":50078373511489,"title":"XX-Large","option1":"XX-Large","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"price":"19.95","grams":227,"compare_at_price":null,"position":4,"product_id":9861703565633,"created_at":"2025-02-08T13:10:25-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":59493673828673,"created_at":"2025-02-08T13:11:41-08:00","position":1,"updated_at":"2025-02-08T13:11:43-08:00","product_id":9861703565633,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3621.jpg?v=1739049103","width":4032,"height":3024},{"id":59493673894209,"created_at":"2025-02-08T13:11:49-08:00","position":2,"updated_at":"2025-02-08T13:11:51-08:00","product_id":9861703565633,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3616.jpg?v=1739049111","width":4032,"height":3024},{"id":59493674680641,"created_at":"2025-02-08T13:11:58-08:00","position":3,"updated_at":"2025-02-08T13:12:00-08:00","product_id":9861703565633,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3620.jpg?v=1739049120","width":4032,"height":3024}],"options":[{"name":"Size","position":1,"values":["Medium","Large","X-Large","XX-Large"]}]},{"id":9728958267713,"title":"Electric Fan Switch and Label","handle":"electric-fan-switch-and-label","body_html":"\u003cp\u003e\u003cstrong\u003eElectric Fan Override Switch\u003cspan style=\"color: #000000;\"\u003e!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eIt's a good idea to have the option to turn on your electric fan(s) in the event your temperature sensor becomes inoperable and fails to trigger the fan(s) for cooling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis switch has two positions, one for \"Auto\" which lets the electric fan(s) to be triggered by the current trigger method, and the second position is for \"Override\" which allows for the fans to be triggered be activating this toggle switch.  Most electric fan setups rely on a relay to provide power to the fan(s), this switch intercepts the ground wire for that relay.  The ground wire from the relay connects to the center post of this toggle switch, one of the two outer terminals connects to the currently installed temperature switch, and the other outer terminal connects to a good ground. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHole for Toggle switch: must be 1\/2\" diameter \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff0000;\"\u003eThis toggle switch is designed to be used with a relay system to power your electric fan(s) and be installed in line of the ground wire for the relay.  This toggle switch is not setup to be installed in between the power wire from the battery to the fan(s).  Please do your own research to determine if you can use this toggle switch to override the operation of your electric fan(s).\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e  One toggle switch, one adhesive-backed placard for labeling switch, wiring to aid in installation, mounting nuts, black toggle cover for stealth look.\u003c\/p\u003e","published_at":"2024-09-19T16:55:37-07:00","created_at":"2024-09-19T11:19:22-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Fan Switch","tags":[],"variants":[{"id":49407216746817,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TS001_EF","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"13.95","grams":51,"compare_at_price":null,"position":1,"product_id":9728958267713,"created_at":"2024-09-19T11:19:22-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":47184306012481,"created_at":"2024-09-19T11:19:52-07:00","position":1,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9728958267713,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3135.jpg?v=1755445622","width":4032,"height":3024},{"id":47184310141249,"created_at":"2024-09-19T11:20:07-07:00","position":2,"updated_at":"2025-08-17T08:47:02-07:00","product_id":9728958267713,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_3139.jpg?v=1755445622","width":4032,"height":3024}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8030943740225,"title":"Custom Wheel Cap for AR Torq Thrust Wheels - Machined","handle":"custom-wheel-cap-for-ar-torque-thrust-wheels","body_html":"\u003ch3\u003e\n\u003cstrong\u003eThese caps are sold in pairs, ordering \"1\" will get you two wheel caps.  So if you'd like a set of four caps for your vehicle, make sure the quantity says 2 in your cart.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis cap is designed to fit the American Racing Torq Thrust wheels and provide clearance for the dust cap on the end of the front axles.  I feel the stock wheel caps provided by American Racing are too large and stick out too far, so I designed these caps to be a low profile option, while still looking like they came from the factory.\u003c\/p\u003e\n\u003cp\u003eThese caps are CNC machined from 1\/2\" thick 6061 Aluminum plate, here in the United States.  The back side of the wheel cap is bored out over 3\/8\" to clear most dust caps.  Due to the nature of machined parts, some tooling marks can be seen.\u003c\/p\u003e\n\u003cp\u003eWhile these are designed to clear the dust caps on the front of some classic vehicles, they also work well on the rear wheels, completing the look around the whole vehicle.\u003c\/p\u003e\n\u003cp\u003eAnother great feature about these caps is they do not need to be removed in order to remove the wheel from the car.  These caps are designed to allow the standard socket tools to be used to remove the wheel and not be in the way.  Fantastic!!\u003c\/p\u003e\n\u003cp\u003eEach cap is shipped with five flat head cap screws for a flush, minimalist finish.\u003c\/p\u003e\n\u003cp\u003eThese caps fit a number of American Racing Wheels, including model numbers:\u003c\/p\u003e\n\u003cp\u003eVN105, VN109, VN205, VN215, VN309, VN405, VN450, VN470, VN605, VN515, VN511 and VN815.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe simplest way to determine if these caps will fit your ARTT wheels, is to measure the distance from one wheel cap threaded hole on the wheel to the next wheel cap threaded hole.  These caps will fit those with a 2-1\/4\" distance (see pic).  The bolt pattern diameter for these caps is 3.78\", but it's not as easy to measure that diameter, that's why it's easier to measure the distance of the bolt holes themselves.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe pictures of the caps on a classic Mustang are of my car with the ARTT wheels and caps in place.  I took the extra step to polish these caps, but polishing is not an option at this time.  The pictures of the caps off the car are how they look when you receive them.\u003c\/p\u003e","published_at":"2024-09-06T07:58:38-07:00","created_at":"2022-12-01T15:19:28-08:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"Wheel Cap","tags":[],"variants":[{"id":44126222221633,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WC001.2_MFP","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"49.95","grams":181,"compare_at_price":"65.00","position":1,"product_id":8030943740225,"created_at":"2022-12-01T15:19:28-08:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":40885101232449,"created_at":"2023-04-07T13:59:31-07:00","position":1,"updated_at":"2023-04-07T14:00:02-07:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/Gen2_1.jpg?v=1680901202","width":4032,"height":3024},{"id":40885102543169,"created_at":"2023-04-07T13:59:46-07:00","position":2,"updated_at":"2023-04-07T14:00:02-07:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/Gen2_2.jpg?v=1680901202","width":4032,"height":3024},{"id":40885103034689,"created_at":"2023-04-07T13:59:54-07:00","position":3,"updated_at":"2023-04-07T14:00:02-07:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/Gen2_3.jpg?v=1680901202","width":4032,"height":3024},{"id":62929103192385,"created_at":"2025-12-29T13:20:37-08:00","position":4,"updated_at":"2025-12-29T13:21:14-08:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/2.25Distance.jpg?v=1767043274","width":4032,"height":3024},{"id":39942333137217,"created_at":"2022-12-01T15:20:04-08:00","position":5,"updated_at":"2025-12-29T13:21:14-08:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/1mod.jpg?v=1767043274","width":4032,"height":2268},{"id":39942341263681,"created_at":"2022-12-01T15:23:38-08:00","position":6,"updated_at":"2025-12-29T13:21:14-08:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/2mod.jpg?v=1767043274","width":4032,"height":2268},{"id":39942332547393,"created_at":"2022-12-01T15:19:28-08:00","position":7,"updated_at":"2025-12-29T13:21:14-08:00","product_id":8030943740225,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/3mod.jpg?v=1767043274","width":4032,"height":2268}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":9690537296193,"title":"Premium Short Sleeve Shirt - F100","handle":"premium-short-sleeve-shirt-f100","body_html":"\u003cp\u003eThis is next KruseBuilt shirt design, and this time it's the got the Awesome F100 on the back!\u003c\/p\u003e\n\u003cp\u003eThis is a high quality, smooth, breathable fabric shirt, designed to fit better than typical cotton shirts.\u003c\/p\u003e\n\u003cp\u003e1968 Ford F100 picture collage on the back of the shirt, and the Kruse Built logo on the front.\u003c\/p\u003e","published_at":"2024-08-25T15:06:19-07:00","created_at":"2024-08-25T14:49:06-07:00","updated_at":"2026-09-15T08:18:35-07:00","vendor":"KruseBuilt","product_type":"T-Shirt","tags":[],"variants":[{"id":49284386488641,"title":"Medium","option1":"Medium","option2":null,"option3":null,"sku":"TSH-F1003P-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"21.95","grams":227,"compare_at_price":null,"position":1,"product_id":9690537296193,"created_at":"2024-08-25T14:49:06-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":49284386521409,"title":"Large","option1":"Large","option2":null,"option3":null,"sku":"TSH-F1003P-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"21.95","grams":227,"compare_at_price":null,"position":2,"product_id":9690537296193,"created_at":"2024-08-25T14:49:06-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":49284386554177,"title":"X-Large","option1":"X-Large","option2":null,"option3":null,"sku":"TSH-F1003P-3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"21.95","grams":227,"compare_at_price":null,"position":3,"product_id":9690537296193,"created_at":"2024-08-25T14:49:06-07:00","updated_at":"2026-09-15T08:18:35-07:00"},{"id":49284386586945,"title":"XX-Large","option1":"XX-Large","option2":null,"option3":null,"sku":"TSH-F1003P-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"21.95","grams":227,"compare_at_price":null,"position":4,"product_id":9690537296193,"created_at":"2024-08-25T14:49:06-07:00","updated_at":"2026-09-15T08:18:35-07:00"}],"images":[{"id":46858660151617,"created_at":"2024-08-25T14:51:43-07:00","position":1,"updated_at":"2024-08-25T14:51:45-07:00","product_id":9690537296193,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/IMG_2976.jpg?v=1724622705","width":4032,"height":3024},{"id":46858673357121,"created_at":"2024-08-25T14:58:03-07:00","position":2,"updated_at":"2024-08-25T14:58:04-07:00","product_id":9690537296193,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/files\/Screenshot2024-08-25145609.jpg?v=1724623084","width":1028,"height":771},{"id":40097980121409,"created_at":"2022-12-27T20:09:46-08:00","position":3,"updated_at":"2022-12-27T20:12:26-08:00","product_id":9690537296193,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/Front1.jpg?v=1672200746","width":4032,"height":3024},{"id":40097981301057,"created_at":"2022-12-27T20:09:55-08:00","position":4,"updated_at":"2022-12-27T20:12:26-08:00","product_id":9690537296193,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0684\/3249\/4913\/products\/Front2.jpg?v=1672200746","width":4032,"height":3024}],"options":[{"name":"Size","position":1,"values":["Medium","Large","X-Large","XX-Large"]}]}]}